Finding Feature Information - Cisco WLC 5700 Series Interface Configuration Manual

Configuring Management Interfaces
This module lists the following topics:
•
•
•
•
•
•
•
•

Finding Feature Information

Your software release may not support all the features documented in this module. For the latest feature
information and caveats, see the release notes for your platform and software release. Use Cisco Feature
Navigator to find information about platform support and Cisco software image support. To access Cisco
Feature Navigator, go to http://www.cisco.com/go/cfn. An account on Cisco.com is not required.
Information About the Management Interface
The management interface is the default interface for in-band management of the controller and connectivity
to enterprise services such as AAA servers. It is also used for communications between the controller and
access points. The management interface has the only consistently "pingable" in-band interface IP address on
the controller. You can access the GUI of the controller by entering the management interface IP address of
the controller in the address field of your browser.
For CAPWAP, the controller requires one management interface to control all inter-controller communications
and one AP-manager interface to control all controller-to-access point communications, regardless of the
number of ports.
OL-32314-01
Finding Feature Information, page 45
Information About the Management Interface, page 45
Pre-requisites for Configuring Management Interfaces, page 47
Restrictions for Configuring Management Interfaces, page 47
Configuring the Management Interface using the CLI, page 48
Configuring the Management Interface, page 48
Feature History and Information For Configuring Management Interfaces, page 49
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
4
C H A P T E R
45