Understanding Abbreviated Commands - Cisco WLC 5700 Series Interface Configuration Manual

Using the Command-Line Interface
Mode
Interface
configuration
Line configuration

Understanding Abbreviated Commands

You need to enter only enough characters for the controller to recognize the command as unique.
This example shows how to enter the show configuration privileged EXEC command in an abbreviated form:
Controller# show conf
OL-32314-01
Access Method Prompt
While in global
Controller(config-if)#
configuration
mode, enter the
interface command
(with a specific
interface).
While in global
Controller(config-line)#
configuration
mode, specify a line
with the line vty or
line console
command.
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
Understanding Abbreviated Commands
Exit Method About This Mode
To exit to Use this mode to
global configure VLAN
configuration parameters. When
mode, enter the VTP mode is
exit command. transparent, you can
create
To return to
extended-range
privileged
VLANs (VLAN IDs
EXEC mode,
greater than 1005)
press Ctrl-Z or
and save
enter end.
configurations in the
controller startup
configuration file.
To exit to Use this mode to
global configure parameters
configuration for the Ethernet
mode, enter ports.
exit.
To return to
privileged
EXEC mode,
press Ctrl-Z or
enter end.
To exit to Use this mode to
global configure parameters
configuration for the terminal line.
mode, enter
exit.
To return to
privileged
EXEC mode,
press Ctrl-Z or
enter end.
3