Cisco WLC 5700 Series Interface Configuration Manual page 22

Accessing the CLI Through a Console Connection or Through Telnet
• Connect the controller console port to a management station or dial-up modem, or connect the Ethernet
management port to a PC. For information about connecting to the console or Ethernet management
port, see the controller hardware installation guide.
• Use any Telnet TCP/IP or encrypted Secure Shell (SSH) package from a remote management station.
The controller must have network connectivity with the Telnet or SSH client, and the controller must
have an enable secret password configured.
After you connect through the console port, through the Ethernet management port, through a Telnet
session or through an SSH session, the user EXEC prompt appears on the management station.
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
12
• The controller supports up to 16 simultaneous Telnet sessions. Changes made by one Telnet user
are reflected in all other Telnet sessions.
• The controller supports up to five simultaneous secure SSH sessions.
Using the Command-Line Interface
OL-32314-01