Table of Contents
Advertisement
7.6
Step 4: Channel Search
The following on-screen display appears:
Tip!
The receiver already has a
preinstalled list of channels for
Astra 19.2° East and Eutelsat 13°
East. A channel search is not
absolutely necessary.
If you do not want to perform a channel search then press the
"Time setting".
If you want to perform a channel search, use the
The following on-screen display appears:
List presorted for (Country Select):
Using the
buttons, select whether the channels found after the search are to be sorted
using a factory-provided channel list for the selected country. Currently this feature is only
available for Germany, Austria and Switzerland.
Satellite and Position:
Now use the
select the setting "All Satellites". If "All Satellites" is selected, all the individual satellites you
have set up will be searched for new channels. Make sure your reception system is aligned to
this/these satellite(s).
buttons to choose between the individual satellites you have set up, or
(green).button. Continue with
buttons to select "Yes".
Fig: Channel Search
Fig: Execute channel search
41 from 64
Advertisement
Table of Contents
