User-Defi Ned - Kathrein UFSconnect 906 Operating Instructions Manual

7 First Installation
Satellite and Position:
Select the desired satellite using the
to view a list of all stored satellites and then select the required satellites from this list.
Test transponder:
Select the "Test-Transponder" fi eld. Here you can select a transponder to check the signal
strength bar and signal quality bar to see whether your settings are correct.
When you have completed all settings for the selected satellites, press the

Press the
Continue with item "7.6 Step 4: Channel Search" on page 41 of the fi rst installation.
7.5.5.3 User-defi ned
Select "Userdefi ned" with
The following on-screen display appears:
38 from 64

(green) button to go to the next step of the fi rst installation.
 
. Press
buttons. Alternatively you can press the
.
Fig: Tuner confi guration, OneCable, user-defi ned
Fig: Tuner confi guration, OneCable, user-defi ned, system ...

button

button.