Removing And Installing Hardware - Lenovo ThinkStation P920 User Manual

Machine types: 30bd, 30bv, and 30bc
Hide thumbs Also See for ThinkStation P920:
Table of Contents

Advertisement

3. Press the pit
1
so that the handle
remove the cover from the chassis.
Figure 9. Removing the computer cover
Notes:
• Depending on your computer model, some of the hardware parts in the removal or installation section
might not be available.
• Use computer parts provided only by Lenovo.
• When removing or installing an option, use the appropriate instructions in this section along with the
instructions that come with the option.
• In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will
come with the CRU or will come a few days after the CRU arrives.

Removing and installing hardware

This section provides instructions on how to remove and install hardware for your computer. You can expand
the capabilities of your computer and maintain your computer by removing or installing hardware.
Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
External options
You can connect external options to your computer, such as external speakers, a printer, or a scanner. For
some external options, you must install additional software in addition to making the physical connection.
When installing an external option, see "Front view" on page 1 and "Rear view" on page 2 to identify the
62
P920 User Guide
2
is lifted. Then, pivot the handle as shown and pull the handle to

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents