M.2 Solid-State Drive - Lenovo ThinkStation P920 User Manual

5. To install the rear fan assembly, slide it into the rear fan assembly bay until it snaps into position.
Figure 75. Installing the rear fan assembly
6. Reinstall the direct cooling air baffle. See "Direct cooling air baffle" on page 65.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to "Completing the parts replacement" on page 141.

M.2 solid-state drive

Attention: Do not open your computer or attempt any repair before reading and understanding the "Read
this first: Important safety information" on page v.
An M.2 solid-state drive can be installed in the M.2 solid-state drive holder or an M.2 solid-state drive PCIe
adapter.
M.2 solid-state drive in the M.2 solid-sate drive holder
To remove or install an M.2 solid-state drive in the M.2 solid-sate drive holder, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 61.
2. Lay the computer on its side for easier access to the M.2 solid-state drive slots.
3. Locate the M.2 solid-state drive slots. See "Parts on the system board" on page 6.
98
P920 User Guide