c. Pull the handle of the retention latch outward to the open position.
Figure 92. Opening the retention latch
d. Hold the new M.2 solid-state drive by its edges and ensure that the circuit board side is facing
upward. Insert the drive into the M.2 solid-state drive slot on the PCIe adapter until it is firmly seated.
Then, insert the plug of the retention latch into the hole to secure the new drive.
Note: Do not touch the circuit board of the M.2 solid-state drive.
Figure 93. Installing the M.2 solid-state drive
.
Chapter 7
Hardware removal and installation
107