Table of Contents
Advertisement
Prerequisites for hot-swappable M.2 SSD storage box replacement
For some computer models, an NVMe storage tray might be installed in the front-access storage bay. The
2
M.2 SSD storage box(
the M.2 SSD inside without even turning off your computer.
Attention: To avoid damage and loss of data, observe the following guidelines before replacing the hot-
swappable M.2 SSD storage box:
• Ensure that NVMe RAID mode is disabled.
• Ensure that the operating system of your computer does not reside on the M.2 SSD inside the hot-
swappable M.2 SSD storage box.
• Lock the M.2 SSD storage box to prevent unexpected removal. The keys are attached to the rear of the
computer. For security, store the keys in a secure place.
Handling static-sensitive devices
Do not open the static-protective package containing the new part until the defective part has been removed
and you are ready to install the new part. Static electricity, although harmless to you, can seriously damage
computer components and options.
When you handle options and other computer components, take these precautions to avoid static-electricity
damage:
• Limit your movement. Movement can cause static electricity to build up around you.
• Always handle options and other computer components carefully. Handle PCI/PCIe cards, memory
modules, system boards, and microprocessors by the edges. Never touch any exposed circuitry.
• Prevent others from touching the options and other computer components.
• Touch the static-protective package containing the part to a metal expansion-slot cover or other
unpainted metal surface on the computer for at least two seconds. This reduces static electricity from the
package and your body before you install or replace a new part.
• When possible, remove the new part from the static-protective package, and install it directly in the
computer without setting the part down. When this is not possible, place the static-protective package on
a smooth, level surface and place the part on the package.
• Do not place the part on the computer cover or other metal surface.
Removing and installing hardware
This section provides instructions on how to remove and install hardware for your computer.
) in the NVMe storage tray(
1
) can be hot-swappable, which means you can replace
Chapter 7
.
Hardware removal and installation
61
Advertisement
Table of Contents
