d. Insert tabs
1
,
2
, and
Figure 43. Inserting tabs into the corresponding slots
7. Install a 3.5-inch storage drive into the bracket by doing the following:
a. Flex both sides of the bracket and align pins
holes in the new 3.5-inch storage drive.
b. Install the new 3.5-inch storage drive into the bracket. Do not touch the circuit board
Figure 44. Installing the new 3.5-inch storage drive into the bracket
3
into the corresponding slots. Ensure that the tabs are secured in place.
1
,
2
,
3
, and
4
on the bracket with the corresponding
.
Chapter 7
Hardware removal and installation
5
on the drive.
81