Lenovo ThinkStation P920 User Manual page 114

6. To remove an M.2 solid-state drive, do the following:
a. Loosen the screw that secures the M.2 solid-state drive
b. Remove the M.2 solid-state drive with the screw holder from the M.2 solid-state drive slot
c. Remove the screw holder from the M.2 solid-state drive
Figure 78. Removing the M.2 solid-state drive
7. To install an M.2 solid-state drive, do the following:
a. Stick a thermal pad into the position on the M.2 solid-state drive holder as shown. If necessary,
remove the film that protects the thermal pad.
Figure 79. Sticking the thermal pad on the M.2 solid-state drive holder
100
P920 User Guide
1 .
3 .
2 .