Lenovo ThinkStation P920 User Manual page 90

The multi-drive conversion kit (hereafter referred to as kit) might be equipped with either one or both of the
following components:
• Slim optical drive
• Storage drive (such as hard disk drive, solid-state drive, or hybrid drive)
Slim optical drive
Note: The instructions on how to remove or install a slim optical drive in the kit also apply to the slim-optical-
drive adapter.
To remove or install a slim optical drive, do the following:
1. Prepare your computer. See "Preparing your computer and removing the computer cover" on page 61.
2. Ensure that all the cables are disconnected from the kit. Remove the kit from the front of the computer.
See "Device in a flex bay" on page 67.
3. To remove the slim optical drive from the kit, do the following:
a. Press the clip through the hole in the top of the kit as shown and push forward the slim optical drive.
Then, remove the slim optical drive out of the kit.
Figure 33. Removing the slim optical drive from the kit
b. Detach the bracket as shown to remove it from the slim optical drive.
Figure 34. Removing the bracket from the slim optical drive
4. To install a new slim optical drive into the kit, do the following:
76
P920 User Guide