1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. ThinkStation P330
  6. User manual

Lenovo ThinkStation P330 User Manual

Hide thumbs Also See for ThinkStation P330:
Table of Contents

Advertisement

Quick Links

P330
User Guide

Advertisement

Table of Contents
loading

Related Manuals for Lenovo ThinkStation P330

Summary of Contents for Lenovo ThinkStation P330

  • Page 1 P330 User Guide...
  • Page 2 • Setup Guide First Edition (July 2020) © Copyright Lenovo 2020. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS-...

  • Page 3: Table Of Contents

    Use a media card (for selected models) ..Call Lenovo ....Purchase accessories ... .
  • Page 4 P330 User Guide...

  • Page 5: About This Documentation

    • Depending on the version of operating systems and programs, some user interface instructions might not be applicable to your computer. • Documentation content is subject to change without notice. Lenovo makes constant improvements on the documentation of your computer, including this User Guide. To get the latest documentation, go to: https://pcsupport.lenovo.com...
  • Page 6 P330 User Guide...

  • Page 7: Chapter 1. Meet Your Computer

    USB 3.1 connectors Gen 2 (2) Slim-optical-drive eject button (available on some models) Press the button to eject the tray of the slim optical drive. To close the tray, push the tray inward until you hear a click. © Copyright Lenovo 2020...

  • Page 8: Rear View

    Power button Press the power button to turn on your computer. If your computer is unresponsive, you can turn off the computer by pressing and holding the power button for four or more seconds. Power indicator When the power indicator is on, the computer is turned on. Storage drive activity indicator This indicator shows the status of the internal storage drives (such as hard disk drives or solid-state drives).
  • Page 9 Figure 2. Rear connectors ® DisplayPort connectors (2) Audio line-out connector USB 3.1 connector Gen 1 (supports smart power on) USB 3.1 connector Gen 1 USB 2.0 connectors (2) PCIe card area* Cable-lock slots (available on some models) Power-cord connector DisplayPort connector or HDMI™...
  • Page 10 DVI monitor connector Use this connector to attach a DVI monitor or other compatible devices. DisplayPort connector Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible devices. Mini DisplayPort connector Use this connector to attach a high-performance monitor, a direct-drive monitor, or other compatible devices.

  • Page 11: Statement On Usb Transfer Rate

    Ethernet connectors (2) Connect an Ethernet cable for a local area network (LAN). Note: To operate the computer within Federal Communications Commission (FCC) Class B limits, use a Category 5 Ethernet cable. DisplayPort connector or HDMI connector (available on some models) Depending on the computer model, the connector might be DisplayPort connector or HDMI connector.

  • Page 12: Internal Storage Drives

    Internal storage drives Internal storage drives are devices that your computer uses to read and store data. You can add drives to your computer to increase storage capacity and enable your computer to read other types of media. Internal storage drives are installed in bays. When you remove or install an internal storage drive, note the type and size of the drive that each bay supports and correctly connect the required cables.
  • Page 13 SD card slot (available on some models) An SD card is installed in some models. M.2 solid-state drive slot An M.2 solid-state drive is installed in some models. Storage drive bay You can install hard disk drives or solid-state drives in the storage drive bay. PCIe card slots (3) You can install compatible PCIe cards and PCIe solid-state drives in the PCIe card slots.
  • Page 14 P330 User Guide...

  • Page 15: Chapter 2. Get Started With Your Computer

    Your computer helps you connect to the world through a wired or wireless network. Connect to the wired Ethernet Connect your computer to a local network through the Ethernet connector on your computer with an Ethernet cable. © Copyright Lenovo 2020...

  • Page 16: Connect To Wi-Fi Networks (For Selected Models)

    Connect to Wi-Fi networks (for selected models) ® If your computer includes a wireless LAN module, you can connect your computer to Wi-Fi networks. The wireless LAN module on your computer may support different standards. For some countries or regions, use of 802.11ax may be disabled according to local regulations.
  • Page 17 Note: If you set a higher resolution for the computer display than the external display, only part of the screen can be displayed on the external display. Chapter 2 Get started with your computer...
  • Page 18 P330 User Guide...

  • Page 19: Chapter 3. Explore Your Computer

    Open the system menu from the top-right corner and then click Settings ➙ Bluetooth. b. In the Bluetooth section enable Bluetooth with the toggle button at the top. 2. Any discoverable devices will be shown in the Devices list. © Copyright Lenovo 2020...

  • Page 20: Use The Optical Drive (For Selected Models)

    3. Press the card and remove it from your computer. Store the card safely for future use. Purchase accessories Lenovo has a number of hardware accessories and upgrades to help expand the capabilities of your computer. Options include memory modules, storage devices, network cards, power adapters, keyboards, mice, and more.

  • Page 21: Chapter 4. Secure Your Computer Information

    3. Depending on the password type, select Set Supervisor Password, Set Power-On Password, Set System Management Password, or Hard Disk Password and press Enter. 4. Follow the on-screen instructions to set, change, or remove a password. 5. Press F10 or Fn+F10 to save the changes and exit. © Copyright Lenovo 2020...

  • Page 22: Use Computrace Agent Software Embedded In Firmware (For Selected Models)

    • If the supervisor password is forgotten, it might not be removed by clearing CMOS depending on your BIOS settings. • If the hard disk password is forgotten, Lenovo cannot remove the password or recover data from the storage drive.

  • Page 23: Use Intel Bios Guard

    3. Select Enabled and press Enter. 4. Press F10 or Fn+F10 to save the changes and exit. When the cover presence switch connector on the system board is enabled, if the cover presence switch detects that the computer cover is not correctly installed or closed, an error message will be displayed when you turn on the computer.
  • Page 24 P330 User Guide...

  • Page 25: Chapter 5. Uefi Bios

    UEFI BIOS supports three or four display languages: English, French, simplified Chinese, and Russian (for selected models). To change the display language of UEFI BIOS: 1. Select Main ➙ Language and press Enter. 2. Set the display language as desired. © Copyright Lenovo 2020...

  • Page 26: Change The Display Mode Of Uefi Bios

    Change the display mode of UEFI BIOS You can use UEFI BIOS in the graphic mode or the text mode according to your needs. To change the display mode of UEFI BIOS: 1. Restart the computer. When the logo screen is displayed, press F1 or Fn+F1. 2.

  • Page 27: Change Bios Settings Before Installing A New Operating System

    • Using the built-in software update service: Ubuntu software update will check the LVFS site for any firmware updates and notify you when updates are available. • From the Lenovo Support Web site: 1. Go to https://pcsupport.lenovo.com 2. Download the flash BIOS update driver for the operating system version or the ISO image version (used to create a flash update disc).
  • Page 28 P330 User Guide...

  • Page 29: Chapter 6. Hardware Removal And Installation

    If you intend on installing the CRU, Lenovo will ship the CRU to you. CRU information and replacement instructions are shipped with your product and are available from Lenovo at any time upon request. You might be required to return the defective part that is replaced by the CRU.

  • Page 30: Handling Static-Sensitive Devices

    Handling static-sensitive devices Do not open the static-protective package containing the new part until the defective part has been removed and you are ready to install the new part. Static electricity, although harmless to you, can seriously damage computer components and options. When you handle options and other computer components, take these precautions to avoid static-electricity damage: •...
  • Page 31 4. Remove the two screws that secure the computer cover. Then slide the cover to the rear of the computer to remove the cover. Figure 4. Removing the computer cover 5. Release the three plastic tabs of the front bezel and pivot the front bezel outward to remove it from the computer.

  • Page 32: Removing And Installing Hardware

    • When removing or installing an option, use the appropriate instructions in this section along with the instructions that come with the option. • In most areas of the world, Lenovo requires the return of the defective CRU. Information about this will come with the CRU or will come a few days after the CRU arrives.
  • Page 33 Your computer has one PCIe x1 card slot, one PCIe x16 card slot (negotiable link width x4), and one PCIe x16 graphics card slot (graphics card available on some models). To remove or install a PCIe card, do the following: 1.

  • Page 34: M.2 Solid-State Drive

    b. If necessary, remove the appropriate metal slot cover on the rear of the chassis and pivot the card retaining clip to the open position. c. Install the new card into the card slot on the system board until it is securely seated. Then rotate the PCIe card retainer to the closed position.
  • Page 35 a. Turn the two mounting studs 90-degree counterclockwise to release the heat sink. Then, lift the heat sink off the plastic holder. Figure 10. Removing the heat sink from the plastic holder b. Pull the handle of the retaining latch outward to the open position. The M.2 solid-state drive is released from the secured position and pivots upward.
  • Page 36 a. If necessary, align the four tabs on the rear of the plastic holder with the corresponding holes in the chassis. Then slide the plastic holder toward the system board until it snaps into position. Figure 12. Installing the plastic holder b.
  • Page 37 c. Hold the new M.2 solid-state drive by its edges and ensure that the circuit board side is facing upward. Align the contact edge of the new drive with the key in the corresponding slot. Then carefully insert the new drive into the slot at an angle of about 20 degrees and pivot the new drive downward. Insert the plug of the retaining latch into the hole to secure the new drive.
  • Page 38 6. If necessary, remove the film that covers the thermal pad at the bottom of the heat sink. Place the heat sink on the M.2 solid-state drive. Ensure that the two mounting studs on the heat sink are in the open position and press the studs on the heat sink into the corresponding holes in the plastic holder as shown.
  • Page 39 • To complete the installation or replacement, go to “Completing the parts replacement” on page 59. M.2 solid-state drive in an M.2 solid-state drive PCIe adapter To remove or install the M.2 solid-state drive in the M.2 solid-state drive PCIe adapter, do the following: 1.
  • Page 40 a. Ensure that a thermal pad is placed in position on the M.2 solid-state drive adapter. Figure 19. Installing the thermal pad b. Pull outward the handle of the retaining latch in the M.2 solid-state drive adapter. c. Insert the new M.2 solid-state drive into the M.2 slot. Then, insert the plug of the retaining latch into the hole to secure the new drive.

  • Page 41: Memory Module

    d. Position the heat sink on the M.2 solid-state drive adapter. Ensure that the two mounting studs in the heat sink are aligned with the holes in the M.2 solid-state drive adapter. Then, push the mounting studs downward to secure the heat sink to the adapter. Figure 21.
  • Page 42 • Install memory modules in the alphabetic order as shown. Figure 22. Memory module installation sequence To remove or install a memory module, do the following: 1. Prepare your computer. See “Preparing your computer” on page 24. 2. Locate the memory slots. 3.

  • Page 43: Slim Optical Drive

    a. Open the retaining clips of the memory slot. Figure 24. Opening the retaining clips b. Position the new memory module over the memory slot. Ensure that the notch on the memory module is aligned with the key in the slot. Push the memory module straight down into the slot until the retaining clips completely close.
  • Page 44 a. Disconnect cables from the rear of the slim optical drive, press the release button , and then slide the slim optical drive from the front of the chassis. Figure 26. Removing the slim optical drive b. Detach the bracket as shown to remove it from the slim optical drive. Figure 27.
  • Page 45 a. If a plastic shield is installed in the front bezel, remove the plastic shield as shown. Figure 28. Removing the plastic shield b. If a metal shield is installed in the slim optical drive bay, remove the metal shield as shown. Figure 29.

  • Page 46: Coin-Cell Battery

    c. Align the three tabs on the bracket with the corresponding holes in the new slim optical drive. Then, install the bracket to the new slim optical drive. Figure 30. Installing the bracket to the new slim optical drive d. Insert the new slim optical drive into the chassis until you hear a click. The slim optical drive is secured in place.

  • Page 47: Cover Presence Switch

    The coin-cell battery normally requires no charging or maintenance throughout its life; however, no battery lasts forever. If the coin-cell battery fails, the date and time information is lost. Refer to the “Lithium coin-cell battery notice” in the Safety and Warranty Guide for information about disposing of the coin-cell battery.
  • Page 48 1. Remove the computer cover. See “Preparing your computer” on page 24. 2. Locate the cover presence switch. 3. To remove the cover presence switch, do the following: a. Disconnect the cover presence switch cable from the cover presence switch connector on the system board.

  • Page 49: Power Supply Assembly

    Power supply assembly Attention: Do not open your computer or attempt any repair before reading and understanding the Appendix A “Important safety information” on page 67. Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety and proper Underwriters Laboratories (UL) certification.
  • Page 50 c. Remove the three screws at the rear of the chassis that secure the power supply assembly. Press the power supply clip downward to release the power supply assembly. Then slide the power supply assembly to the front of the computer and lift it out of the chassis. Figure 36.

  • Page 51: Storage Drive In The Storage Drive Bay

    Install and tighten the three screws to secure the power supply assembly. Note: Use only screws provided by Lenovo. Figure 37. Installing the power supply assembly c. Connect the power supply assembly cables to the system board and each of the drives.
  • Page 52 2. Locate the storage drive bay. See “Internal storage drives” on page 6. 3. To remove the 3.5-inch storage drive, do the following: a. Disconnect the signal cable and the power cable from the storage drive. b. Push the tab inward and then press the tab downward as shown to release the storage drive from the storage drive bay.
  • Page 53 c. Pull the tab outward to remove the storage drive with the bracket from the bay. Figure 39. Removing the 3.5-inch storage drive with the bracket d. Flex both sides of the bracket to remove the 3.5-inch storage drive from the bracket. Note: Do not touch the contact edge on the storage drive.
  • Page 54 a. Flex both sides of the bracket and align the four pins on the bracket with the corresponding holes in the new storage drive. Note: Do not touch the contact edge on the storage drive. Figure 41. Installing the 3.5-inch storage drive into the bracket P330 User Guide...
  • Page 55 b. Place the new storage drive with the bracket into the storage drive bay as shown. Press the two tabs on the bracket downward and then push the storage drive inward until it snaps into position. Figure 42. Installing the 3.5-inch storage drive c.
  • Page 56 b. Push the tab inward and then press the tab downward as shown to release the storage drive from the storage drive bay. Figure 43. Releasing the storage drive c. Pull the tab outward to remove the storage drive with the bracket from the bay. Figure 44.
  • Page 57 d. Flex both sides of the bracket to remove the storage drive with converter from the bracket. Note: Do not touch the contact edge on the storage drive. Figure 45. Removing the storage drive with converter from the bracket e. Remove the four screws that secure the 2.5-inch storage drive. Then lift the storage drive out of the storage-drive converter.
  • Page 58 a. Install a new 2.5-inch storage drive into the converter. Then install the four screws to secure the new storage drive to the converter. Note: Do not touch the contact edge on the storage drive. Figure 47. Installing the storage drive into the converter P330 User Guide...
  • Page 59 b. Flex both sides of the bracket and align the four pins on the bracket with the corresponding holes in the new storage-drive converter. Note: Do not touch the contact edge on the storage drive. Figure 48. Installing the storage drive with converter into the bracket Chapter 6 Hardware removal and installation...

  • Page 60: Storage Drive Cage

    c. Place the new storage drive with the bracket into the storage drive bay as shown. Press the two tabs on the bracket downward and then push the storage drive inward until it snaps into position. Figure 49. Installing the storage drive d.
  • Page 61 b. Remove the screw and slide the storage drive cage upward to release it from the chassis. Figure 50. Removing the storage drive cage c. Pull the handle of the bracket to remove the 2.5-inch storage drive from the cage. Figure 51.
  • Page 62 d. Flex the sides of the bracket to remove the 2.5-inch storage drive from the bracket. Note: Do not touch the contact edge on the storage drive. Figure 52. Removing the 2.5-inch storage drive from the bracket 4. To install the storage drive in the storage drive cage, do the following: P330 User Guide...
  • Page 63 a. To install a new 2.5-inch storage drive into the bracket, flex the bracket and align the four pins on the bracket with the corresponding holes in the storage drive. Note: Do not touch the contact edge on the storage drive. Figure 53.

  • Page 64: E-Lock

    c. Align the four holes on the rear of the storage drive cage with the corresponding hooks in the drive bay assembly. Then slide the storage drive cage downward until it snaps into position. Install the screw to secure the storage drive cage. Figure 55.

  • Page 65: Completing The Parts Replacement

    b. Remove the screw that secures the E-lock and remove the E-lock from the chassis. Figure 56. Removing the E-lock 4. To install the E-lock, do the following: a. Align the screw hole in the E-lock with the corresponding hole in the chassis. Then, install the screw to secure the E-lock to the chassis.
  • Page 66 After completing the installation or replacement for all parts, reinstall the computer cover and reconnect cables. To reinstall the computer cover and reconnect cables to your computer, do the following: 1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your computer.
  • Page 67 4. Align the three plastic tabs on the front bezel with the corresponding holes in the chassis. Then pivot the front bezel inward until it snaps into position on the top. Figure 59. Reinstalling the front bezel 5. Position the computer cover on the chassis so that the rail guides on the bottom of the computer cover engage the rails on the chassis.
  • Page 68 8. Reconnect the external cables and power cords to the corresponding connectors on the computer. See Chapter 1 “Meet your computer” on page 1. P330 User Guide...

  • Page 69: Chapter 7. Help And Support

    • Setup Guide screen instructions to filter out the documentation you want. • This User Guide • Regulatory Notice Lenovo Support Web site with the latest support information of the following: • Drivers and software • Diagnostic solutions https://pcsupport.lenovo.com • Product and service warranty •...

  • Page 70: Call Lenovo

    Call Lenovo If you have tried to correct the problem yourself and still need help, you can call Lenovo Customer Support Center. Before you contact Lenovo Prepare the following before you contact Lenovo: 1. Record the problem symptoms and details: •...

  • Page 71: Purchase Additional Services

    • Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.
  • Page 72 P330 User Guide...

  • Page 73: Appendix A. Important Safety Information

    Customer Support Center for further guidance. • Power cords, plugs, power adapters, extension cords, surge protectors, or power supplies that are cracked, broken, or damaged. © Copyright Lenovo 2020...
  • Page 74 Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.
  • Page 75 Do not use them with any other products. For your safety, Lenovo provides a power cord with a grounded attachment plug to use with this product. To avoid electrical shock, always use the power cord and plug with a properly grounded outlet.
  • Page 76 If you intend to use your PC in a country or region that is different from your ordering location, please purchase an additional Lenovo power cord for the country or region where the PC will be used. Refer to the power cord guide provided in our Web site, , for details.
  • Page 77 Plugs and outlets DANGER If a receptacle (power outlet) that you intend to use with your computer equipment appears to be damaged or corroded, do not use the outlet until it is replaced by a qualified electrician. Do not bend or modify the plug. If the plug is damaged, contact the manufacturer to obtain a replacement.
  • Page 78 If the coin-cell battery is not a CRU, do not attempt to replace the coin-cell battery. Replacement of the battery must be done by a Lenovo-authorized repair facility or technician. The Lenovo-authorized repair facilities or technicians recycle Lenovo batteries according to local laws and regulations.
  • Page 79 computer, power adapter, and many accessories produce some heat during normal operation. Extended contact with the body could cause discomfort or, potentially, a skin burn. • Do not charge the battery or operate your computer, power adapter, or accessories near flammable materials or in explosive environments.
  • Page 80 DANGER Connect and disconnect cables as described in the following procedures when installing, moving, or opening covers on this product or attached devices. To connect: To disconnect: 1. Turn everything OFF. 1. Turn everything OFF. 2. First, attach all cables to devices. 2.
  • Page 81 Liquid crystal display (LCD) notice DANGER To avoid shock hazards: • Do not remove the covers. • Do not operate this product unless the stand is attached. • Do not connect or disconnect this product during an electrical storm. • The power cord plug must be connected to a properly wired and grounded power outlet. •...
  • Page 82 2 can be dangerous due to excessive sound pressure levels. If your Lenovo computer came with headphones or earphones in the packaging, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1. If different headphones or earphones are used, ensure that they comply with EN 50332-1 (Clause 6.5...
  • Page 83 For tips on how to minimize visual fatigue, please go to to visit https://www.lenovo.com/us/en/safecomp/ “Minimizing Visual Fatigue”. Tip-over hazard prevention notice The computer may cause harm to children if it is not located in an appropriate place. Follow the tips below to protect children from harm caused by the computer tipping over: •...
  • Page 84 Static electricity prevention Static electricity, although harmless to you, can seriously damage computer components and options. Improper handling of static-sensitive parts can damage the part. When you unpack an option or CRU, do not open the static-protective packaging containing the part until the instructions direct you to install it. When you handle options or CRUs, or perform any work inside the computer, take the following precautions to avoid static-electricity damage: •...
  • Page 85 The cause of a problem might be change in hardware, change in software, or any other actions that might have taken place. A log book can help you or a Lenovo technician determine the cause of a problem. • Back up your data on the storage drive regularly. You can restore the storage drive from a backup.
  • Page 86 spraying cleaner directly onto the keyboard. To remove any crumbs or dust from beneath the keys, you can use a camera blower with a brush or use cool air from a hair dryer. Clean the computer screen: Scratches, oil, dust, chemicals, and ultraviolet light can affect the performance of your computer screen.

  • Page 87: Appendix B. Accessibility And Ergonomic Information

    This chapter provides information about accessibility and ergonomics. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience.
  • Page 88 Working in the virtual office might mean adapting to frequent changes in your environment. Adapting to the surrounding light sources, active seating, and the placement of your computer hardware, can help you improve your performance and achieve greater comfort. This example shows someone in a conventional setting. Even when not in such a setting, you can follow many of these tips.

  • Page 89: Appendix C. Supplemental Information About The Ubuntu Operating System

    The LLW also is preinstalled on the computer. To access the LLW, go to the following directory: /opt/lenovo If you cannot view the LLW either from the Web site or from your computer, contact your local Lenovo office or reseller to obtain a printed version of the LLW.
  • Page 90 You may send your request in writing to the address below accompanied by a check or money order for $15 Lenovo Legal Department Attn: Open Source Team / Source Code Requests 8001 Development Dr. Morrisville, NC 27560 Please include the version of the OS and the version of the Linux Kernel pre-shipped on this Device as part of your request.

  • Page 91: Appendix D. Compliance And Tco Certified Information

    The full text of the system EU declaration of conformity is available at: https://www.lenovo.com/us/en/compliance/eu-doc Lenovo cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the installation of option cards from other manufacturers.
  • Page 92 Lenovo encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Lenovo offers a variety of programs and services to assist equipment owners in recycling their IT products. For information about recycling Lenovo products, go to: https://www.lenovo.com/us/en/compliance/recycling...
  • Page 93 Collect and recycle a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
  • Page 94 If the battery needs to be replaced, contact your place of purchase or contact Lenovo for service. If you need to dispose of a lithium battery, insulate it with vinyl tape, contact your place of purchase or a waste-disposal operator, and follow their instructions.
  • Page 95 Disposing of battery packs from Lenovo products Your Lenovo device might contain a lithium-ion battery pack or a nickel metal hydride battery pack. You can find details on the battery pack in the product documentation. If you need to dispose of a battery pack, insulate it with vinyl tape, contact Lenovo sales, service, or your place of purchase, or a waste-disposal operator, and follow their instructions.
  • Page 96 India RoHS RoHS compliant as per E-Waste (Management) Rules. Mainland China RoHS Taiwan RoHS P330 User Guide...
  • Page 97 • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment.
  • Page 98 Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Meitnerstr. 9, D-70563 Stuttgart. Japan VCCI Class B compliance statement...
  • Page 99 Other compliance and TCO Certified information of countries and regions This section provides other compliance information about Lenovo products. Certification-related information Product name: ThinkStation P330 Machine types: 30D1, 30D2, and 30D4 The latest compliance information is available at: https://www.lenovo.com/us/en/compliance TCO Certified Selected models are TCO Certified and bear the TCO Certified logo.
  • Page 100 Lenovo encourages you to make efficient use of energy an integral part of your day-to-day operations. To help in this endeavor, Lenovo has preset a default power plan. To change the power plan, see “Set the power plan” on page 13.

  • Page 101: Appendix E. Notices And Trademarks

    Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.
  • Page 102 Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Lenovo and is not covered by any open source license, including any Linux agreement(s) which may accompany software included with this product. Lenovo may update this document at any time without notice.

Table of Contents