Gain Correction - Photon Focus MV3-D640I-M01-144-G2-12 User Manual

9 Pixel Data Processing

9.2.3 Gain Correction

The gain correction is based on a grey reference image, which is taken at uniform illumination
to give an image with a mid grey level.
Gain correction is not a trivial feature. The quality of the grey reference image
is crucial for proper gain correction.
Gain correction algorithm
After configuring the camera with a black and grey reference image, the camera is ready to
apply the gain correction:
1. Determine the average value of the grey reference image.
2. Subtract the offset correction matrix from the grey reference image.
3. Divide the average value by the offset corrected grey reference image.
4. Pixels that have a grey level higher than a certain threshold are marked as hot pixels.
5. Store the result in the camera as the gain correction matrix.
6. During image acquisition, multiply the gain correction matrix from the offset-corrected
acquired image and interpolate the hot pixels (see Section 9.2.4).
Gain correction is not a trivial feature. The quality of the grey reference image
is crucial for proper gain correction.
58 of 121
MAN076 09/2017 V1.0