Cleaning of the housing
To clean the surface of the camera housing:
•
Before cleaning disconnect the camera from camera power supply and I/O
connectors.
•
Do not use aggressive solvents or thinners which can damage the surface,
the serial number label and electronic parts.
•
Avoid the generation of ESD during cleaning.
•
Take only a small amount of detergent to clean the camera body. Keep in
mind that the camera body complies to the IP30 standard.
•
Make sure the detergent has evaporated after cleaning before reconnect-
ing the camera to the power supply.
MAN076 09/2017 V1.0
11.1 IMPORTANT NOTICE!
81 of 121