Second Parameter Specification Codes - Mitsubishi FX3U-USB-BD User Manual

FX Series PLC User's Manual - Data Communication Edition
Inverter Communication
7.7

Second Parameter Specification Codes

When handling the following parameters in computer link operation, it is necessary to select second
parameters.
In EXTR K12 and EXTR K13 instructions, when a value shown in the tables below is set to
extension parameter and second parameter are automatically overwritten, and the parameter values are then
read or written.
7.7.1 S500 Series
1. Second parameter specification codes for parameter numbers C2 to C7
Parameter
No.
C2 Frequency setting voltage bias frequency
C3 Frequency setting voltage bias
C4 Frequency setting voltage gain
C5 Frequency setting current bias frequency
C6 Frequency setting current bias
C7 Frequency setting current gain
7.7.2 E500 Series
1. Second parameter specification codes for parameter numbers 902 to 905
Parameter
No.
902 Frequency setting voltage bias
903 Frequency setting voltage gain
904 Frequency setting current bias
905 Frequency setting current gain
E-72
Name
Name
7 Creating Programs (for FX2N and FX2NC PLCs)
7.7 Second Parameter Specification Codes
Second parameter specification code
[Value to be specified in
parameter No. (decimal)]
1902
1904
Second parameter specification code
[Value to be specified in
parameter No. (decimal)]
Offset/Gain Analog
(H00) (H01)
902 1902
903 1903
904 1904
905 1905
S
2
in EXTR instruction for
S
2
902
903
904
905
in EXTR instruction for
S
2
Terminal analog
value (H02)
2902
2903
2904
2905
, the