Mitsubishi FX3U-USB-BD User Manual page 675

FX Series PLC User's Manual - Data Communication Edition
Remote Maintenance
In the case of non-applicable versions (setting an alternative model)
Even software not applicable to a PLC can create programs when an alternative model is set.
In this case, however, programming is enabled only in the ranges provided for the alternative PLC model
such as instructions and program size.
1. Japanese versions
—: Not applicable
Model name
FX , FX , FX
1S 1N 3G
GX Developer
SW D5C(F)-GPPW-J
FX-PCS/WIN
SW0PC-FXGP/WIN
FX-PCS-KIT/98
SW1PC-FXGP/98(-3,-5)
FX-PCS/98-3
SW1PC-FXGP/98-3
FX-PCS-KIT/V-3
SW1-PC-FXGP/V3
FX-A7PHP-KIT
SW1RX-GPPFX
FX and FX
2N 2NC
The versions applicable to FX
2. English versions
—:Not applicable
Model name
FX , FX , FX
1S 1N 3G
GX Developer
SW D5C(F)-GPPW-E
FX-PCS/WIN-E
SW0PC-FXGP/WIN-E
FX and FX
2N 2NC
The versions applicable to FX
Other programming tools not shown above are not applicable.
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
Applicability
(applicable version)
, FX , FX and FX PLCs
3U 1NC 3UC
(Ver. SW2 A or later)
(Ver. 2.10 or later)
(Ver. 4.00 or later)
(Ver. 4.00 or later)
(Ver. 2.00 or later)
(Ver. 3.00 or later)
PLCs
and FX PLCs can be used.
2N 2NC
: Applicable (If applicable versions of main units are limited, they are described inside ( ).)
Applicability
(applicable version)
, FX , FX and FX PLCs
3U 1NC 3UC
(Ver. SW2 A or later)
(Ver. 1.00 or later)
PLCs
and FX PLCs can be used.
2N 2NC
Remarks
For FX and FX PLC
3U 3UC
The models "FX3U" and "FX3UC" cannot be selected.
"FX2N" can be selected and set as the alternative model.
The PP modem mode (ch1) and PP modem mode (ch2)
cannot be set.
For FX PLC
3G
The models "FX3G" cannot be selected.
"FX1N" ("FX2N" when "FX1N" is not supported)can be
selected and set as the alternative model.
The PP modem mode (ch1) and PP modem mode (ch2)
cannot be set.
For FX and FX PLC
1N 1NC
The models "FX1N" and "FX1NC" cannot be selected.
"FX2N" or "FX2NC" can be selected and set as the
alternative model.
For FX PLC
1S
The versions on the left are not applicable.
The versions applicable to FX
Remarks
For FX and FX PLC
3U 3UC
The models "FX3U" and "FX3UC" cannot be selected.
"FX2N" can be selected and set as the alternative model.
The PP modem mode (ch1) and PP modem mode (ch2)
cannot be set.
For FX PLC
3G
The models "FX3G" cannot be selected.
"FX1N"("FX2N" when "FX1N" is not supported) can be
selected and set as the alternative model.
The PP modem mode (ch1) and PP modem mode (ch2)
cannot be set.
For FX and FX PLC
1N 1NC
The models "FX1N" and "FX1NC" cannot be selected.
"FX2N" or "FX2NC" can be selected and set as the
alternative model.
For FX PLC
1S
The versions on the left are not applicable.
The versions applicable to FX
1 Outline
1.4 Programming Tool Applicability
PLC can be used.
1S
PLC can be used.
1S
I-9
A
B
C
D
E
F
G
H
I
Apx.