Anritsu Spectrum Master MS2720T Programming Manual page 75

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Chapter 4 — Spectrum Analyzer Commands
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa:NOISe[:STATe]
OFF|ON|0|1
:CALCulate:MARKer{1|2|3|4|5|6}:DELTa:NOISe[:STATe]?
Description: Turns the delta marker noise on or off. Note that if counter marker is
Parameter: OFF|ON|0|1
Parameter Type: <boolean>
Default Value: OFF
Example: To turn on marker noise for delta marker #1:
Front Panel
Access: Marker, More, Marker Noise
MS2720T PM
Title: Marker Noise
set to on when setting marker noise to on, then counter marker is set to
off. This command is not valid in zero span. The query version of this
command returns a 1 if the specified delta marker is noise marker and
returns a 0 if not.
:CALCulate:MARKer1:DELTa:NOISe ON
:CALCulate:MARKer1:DELTa:NOISe 1
:CALCulate:MARKer:DELTa:NOISe 1
:CALCulate:MARKer:DELTa:NOISe:STATe ON
To turn on marker noise for delta marker #2:
:CALCulate:MARKer2:DELTa:NOISe ON
:CALCulate:MARKer2:DELTa:NOISe 1
:CALCulate:MARKer2:DELTa:NOISe:STATe ON
To turn off marker noise #5:
:CALCulate:MARKer5:DELTa:NOISe OFF
:CALCulate:MARKer5:DELTa:NOISe 0
:CALCulate:MARKer5:DELTa:NOISe:STATe OFF
PN: 10580-00341 Rev. C
www.tehencom.com
4-2 :CALCulate Subsystem
4-17