Anritsu Spectrum Master MS2720T Programming Manual page 260

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
8-12 [:SENSe] Subsystem
[:SENSe]:FREQuency:SIGStandard:NAMe <string>
[:SENSe]:FREQuency:SIGStandard:NAMe?
Title: Signal Standard
Description: Selects the desired signal standard from the list. The <string>
Parameter: <string>
Front Panel
Access: Freq, Signal Standard
[:SENSe]:FREQuency:STARt?
Title: Start Frequency
Description: Queries the start frequency of the RF Band Spectrum. Note that this
Parameter: <freq>
Default Unit: Hz
Related Command: [:SENSe]:FREQuency:STOP?
[:SENSe]:FREQuency:STOP?
Title: Stop Frequency
Description: Queries the stop frequency of the RF Band Spectrum. Note that this
Parameter: <freq>
Default Unit: Hz
8-54
argument is the name of the desired signal standard as displayed in the
instrument's current signal standard list. The list can be seen on the
instrument by choosing the Signal Standard submenu button in the
Freq menu. The list can also be downloaded remotely and viewed using
Anritsu Master Software Tools. For example, if the desired Signal
Standard is P-GSM 900 - Uplink then the value of the <string>
argument would be "P-GSM 900 - Uplink". The query form of this
command will return the name of the currently-selected Signal
Standard on the list.
command is valid only if the current view is set to RF Band Spectrum.
command is valid only if the current view is set to RF Band Spectrum.
PN: 10580-00341 Rev. C
www.tehencom.com
Chapter 8 — WCDMA Commands
MS2720T PM