Anritsu Spectrum Master MS2720T Programming Manual page 303

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Chapter 10 — GSM Commands
:FETCh:PVTFrame?
Description: Returns the most recent Power vs. Time (Frame) measurement results.
Related Command: MEASure:PVTFrame?
:FETCh:PVTSlot?
Description: Returns the most recent Power vs. Time (Slot) measurement results.
:FETCh:SPECtrum:MULTi?
Description: Returns the most recent Multi-Channel Spectrum measurement
Related Command: MEASure:SPECtrum:MULTi?
MS2720T PM
Title: Fetch Power vs. Time (Frame)
The Power vs. Time (Frame) measurement must be the active
measurement. The current measurement can be queried using
CONFigure?. Use the CONFigure:PVTFrame command to set Power vs.
Time (Frame) as the active measurement.
Data is returned as 9 comma-delimited values: Channel Power in dBm,
Burst Power in dBm, Average Burst Power in dBm, Span in MHz,
Occupied Bandwidth in MHz, Frequency Error in MHz, Frequency
Error (ppm), Modulation Type, and TSC. "--" is returned for each data
that is not valid at that instance.
CONFigure:PVTFrame
READ:PVTFrame?
Title: Fetch Power vs. Time (Slot)
The Power vs. Time (Slot) measurement must be the active
measurement. The current measurement can be queried using
CONFigure?. Use the CONFigure:PVTSlot command to set Power vs.
Time (Slot) as the active measurement.
Data is returned as 9 comma-delimited values: Channel Power in dBm,
Burst Power in dBm, Average Burst Power in dBm, Span in MHz,
Occupied Bandwidth in MHz, Frequency Error in MHz, Frequency
Error (ppm), Modulation Type, and TSC. "--" is returned for each data
that is not valid at that instance.
Title: Fetch Multi-Channel Spectrum
results. The Multi-Channel Spectrum measurement must be the active
measurement. The current measurement can be queried using
CONFigure?. Use the CONFigure:SPECtrum:MULTi command to set
Multi-Channel Spectrum as the active measurement.
Data is returned as 1 value: Span in MHz.
:CONFigure:SPECtrum:MULTi
READ:SPECtrum:MULTi?
PN: 10580-00341 Rev. C
www.tehencom.com
10-4 :FETCh Subsystem
10-7