ООО "Техэнком"
Контрольно-измерительные приборы и оборудование
6-10 :TRACe Subsystem
Parameter: <trace type>
Related Command: :FORMat[:DATA]
6-22
Note that the instrument must be set in the selected view. Use the
CONFigure command to set the unit to the selected view.
:TRACe[:DATA]:PREamble?
PN: 10580-00341 Rev. C
www.tehencom.com
Chapter 6 — CDMA Commands
MS2720T PM
Need help?
Do you have a question about the Spectrum Master MS2720T and is the answer not in the manual?
Questions and answers