Table of Contents
Advertisement
Installation of Screen Stiffener
1). Align holes in screen stiffener with holes on side of
docking station.
2). Apply a drop of medium strength thread-locking
adhesive and attach with (2) M4 x 0.7 x 8mm BHCS screws.
Torque to 1.8Nm/16 ± 10% in-lbs using a 2.5 hex drive.
Screen Stiffener Clip
Screen Stiffener
Bracket
Tightening
Knob
M4 x 0.7 x 8mm
BHCS Screws
To Use Screen Stiffener:
1). Insert laptop screen between tabs of screen stiffener clip.
2). Adjust tilt of screen stiffener to the desired viewing level.
3). Tighten knob to hold screen in place.
Adjust tilt of
screen stiffener
Laptop Screen
6
Advertisement
Table of Contents
