Page 1
Owner’s Manual Havis Slim Docking Station for Dell Latitude Rugged 12 Tablet DS-DELL-610 Series DS-DELL-611 DS-DELL-613 DS-DELL-611-2 DS-DELL-613-2 DS-DELL-612 DS-DELL-616 DS-DELL-612-2 DS-DELL-616-2 www.havis.com 1-800-524-9900...
Page 2
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-DELL-610 Series Docking Station for Dell Latitude Rugged 12 Tablet For questions regarding the set-up of your DS-DELL-610 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional...
Table of Contents Specifications Parts Included Port Replication Capability Antenna Identification Installation and Cable Management Operation - Docking Operation - Undocking Precautions • Do not place metal objects or containers of liquid on top of the Docking Station • If a malfunction occurs, immediately unplug the Power Supply and remove the tablet •...
Mounting Bracket to the Motion Device using (4) 1/4“-20 x 5/8” long button head screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’ Typical Motion Device Example...
Page 7
Installation and Cable Management (continued) Ensuring the bundled cables exit through the opening(s) in the Mounting Bracket, place the Docking Station onto the Mounting Bracket and secure with (4) 1/4”-20 x 3/8” long pan head screws (Hardware Kit Item 4). Torque screws to 80 in-lbs (9.0 Nm) ±...
Operation - Docking DO NOT FORCE TABLET ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK THE ALIGNMENT OF TABLET ON DOCKING STATION. Your tablet’s bottom Alignment Sockets will align with the Docking Station’s Alignment Posts. Ensure Docking Station is unlatched by pulling up the Latch Handles. Hold tablet in landscape orientation, with bottom angled toward Docking Station.
Page 9
Operation - Docking (continued) Pivot the top of tablet into Docking Station and apply light rearward pressure to top of tablet. The Front Hooks will align with tablet’s top alignment sockets and secure tablet. For theft deterrence, secure tablet by locking Docking Station with supplied key (Hardware Kit item 2).
Operation - Undocking If previously locked, unlock Docking Station using supplied key. While holding tablet with one hand, lift the Latch Handles up and the Front Hooks will release the tablet. Once unlatched grab both sides of tablet and carefully lift up and out of the Docking Station, top end first.
Related Products Havis offers a wide variety of accessory products specifically for use with the DS-DELL-610 Series Docking Station. For more information or to order, please visit www.havis.com. LPS-138 90W Power Supply External power supply with cigarette lighter adaptor and Dell mini-Bondi output cable for Havis Docking Stations.
Page 12
Havis, Inc. 75 Jacksonville Road Warminster, PA 18974 www.havis.com 1-800-524-9900 DS-DELL-610-SERIES_OMN_12-18...