Table of Contents
Advertisement
Operation - LCD Clip (continued)
Clip Removal (optional):
Should use of the LCD clip not be required, it can be removed
according to the following procedure.
1). Remove computer from docking station.
2). Using a 2.5 mm Hex drive, remove the two screws used to
secure the front hold down bracket.
3).Slide the LCD clip and (2) LCD clip guides off of the front hold
down bracket.
4). Re-attach the front hold down bracket to the docking
station using the same screws removed in step 2. Use a 2.5mm
Hex drive and torque screws to 1.8 Nm (16 in-lbs) ± 10%
5). Ensure that vinyl caps are still in place on the front hold
down bracket and continue with normal use of the docking
station.
Remove (2) screws
NOTE:
It is recommended to use a drop
of medium strength (blue) thread
locking adhesive applied to the
threads of the fasteners.
Front hold down bracket
LCD clip guides
10
Advertisement
Table of Contents
