Rugged mobile docking station for panasonic toughbook 40 (13 pages)
Summary of Contents for Havis DS-DELL-400 Series
Page 1
Owner’s Manual Havis Docking Station for Dell Latitude Rugged Extreme Notebooks DS-DELL-400 Series DS-DELL-401 DS-DELL-404 DS-DELL-406 DS-DELL-401-3 DS-DELL-404-3 DS-DELL-406-3 DS-DELL-402 DS-DELL-405 DS-DELL-407 DS-DELL-402-3 DS-DELL-405-3 DS-DELL-407-3 DS-DELL-403 www.havis.com 1-800-524-9900...
Page 2
Before Beginning (Original Instructions) Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-DELL-400 Series Docking Station for Dell Latitude Rugged Extreme Notebooks For questions regarding the set-up of your DS-DELL-400 Series Docking Station, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional...
Table of Contents Specifications Parts Included Antenna Identification Port Replication Capability Installation Cable Management Operation - Initial Laptop Adjustment Operation - Docking Operation - Undocking Precautions • Do not place metal objects or containers of liquid on top of the Docking Station •...
Port Replication Capability Forward Facing Ports (All Docking Stations, not including DS-DELL-403) Green LED (Docked) Indicator USB 2.0 Mic / Speaker Rearward Facing Ports - Advanced Port Replication (DS-DELL-401, DS-DELL-401-3, DS-DELL-402, DS-DELL-402-3) Antennas Power Ethernet USB 3.0 HDMI Serial Input RJ45 (DS-DELL-401-3, (x3)
Mounting Bracket to the Motion Device using (4) 1/4“-20 x 5/8” long screws (Hardware Kit Item 3). Torque screws to 80 in-lbs (9.0Nm) ± 10%. NOTE: Numerous hole patterns present in Mounting Bracket will accomodate Havis Motion Devices as well as most competitors’...
Use as many zip ties as necessary to secure cables. This loop must be large enough to allow full range of expected rotation and extension without stressing connections. Collect cables to secure to the mounting system (Note: mounting system not included) www.havis.com • 1-800-524-9900...
Operation - Initial Laptop Adjustment BECAUSE DOCKING STATION IS COMPATIBLE WITH MULTIPLE COMPUTER MODELS, FAILURE TO PROPERLY ADJUST FOR YOUR SPECIFIC COMPUTER MODEL MAY RESULT IN LOSS OF PROPER FUNCTION OR DAMAGE TO LAPTOP OR DOCKING STATION. DO NOT FORCE NOTEBOOK ONTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK THE ALIGNMENT OF NOTEBOOK ON DOCKING STATION.
Operation - Initial Laptop Adjustment (continued) Lower the laptop onto the Docking Station, ensuring Docking Connector and Locator Pins are aligned. Press in the Front Hooks until each hook is secure in the computer recess. You will hear an audible clicking noise as Front Hook ratchets into engagement.
Page 10
Operation - Docking (continued) With rear of computer elevated, load front of computer into Docking Station by aligning Front Hooks with the appropriate recesses in the computer. Lower back of laptop onto the Docking Station, ensuring Docking Connector and Locator Pins are aligned. With computer seated on the Docking Station;...
Operation - Undocking (continued) For theft deterrence, secure laptop by locking Docking Station with supplied key (Hardware Kit Item 2). Operation - Undocking If previously locked, unlock Docking Station using supplied key. To release Rear Hook, press in the Lock. Once Rear Hook is released, grab both sides of laptop and lift out of Docking Station, rear end first.
Related Products Havis offers a wide variety of accessory products specifically for use with the DS-DELL-400 Series Docking Station. For more information or to order, please visit www.havis.com. LPS-137 90W Power Supply External power supply and cable for Dell Laptops with cigarette lighter adaptor for DS-DELL-401, DS-DELL-401-3, DS-DELL-406, &...