Installation - Havis DS-DELL-300 Series User Manual

Installation

1). Remove the mounting bracket from the packaging. Next
install the mounting bracket to the motion device using (4)
1/4"-20 button head screws (supplied). Torque screws to
13.4Nm (120 in-lbs) ± 10%.
2). Install the docking station to the mounting bracket using
(4) M6 button head screws (supplied). Torque screws to
4.6Nm (40 in-lbs) ± 10%.
NOTE:
It is recommended to use a drop
of medium strength (blue) thread
locking adhesive applied to the
threads of all the fasteners.
1/4" - 20 Screws (4)
Mounting Bracket
Typical Motion
Device Example
M6 Screws (4)
4