Operation - Lcd Clip - Havis DS-DELL-300 Series User Manual

Operation - LCD Clip

Clip Engagement:
1). Once computer has been docked , LCD clip should be
used to secure LCD when closed or in tablet mode.
2). Ensure LCD is centered and flush against the vinyl caps
on the front hold down bracket.
3). Push down on the LCD latch until it bottoms out against
the front hold down bracket.
4). Raise the LCD clip and rotate it over the LCD latch on the
computer until it snaps into engagement.
Push Down

Stowed Position Shown
Clip Disengagement:
1). Lift and rotate the LCD clip out of engagement until
the LCD can be raised from it's stowed/tablet position. Do
not exert excessive force when disengaging the LCD clip or
damage may occur.
2). Ensure that the LCD clip is lowered to it's stowed position
for storage and to minimize risk of damage.
9
Lift from this edge
LCD
www.havis.com • 1-800-524-9900
Engaged Position Shown