Table of Contents
Advertisement
Cable Management
1). Tip the dock to a position that is comfortable to
work with.
2). Install the (2) zip tie mounts to the mounting bracket
using (2) M4 pan head screws (supplied) and medium
strength thread-locking adhesive. Torque screws to 1.8Nm
(16 in-lbs) ± 10%.
3.) Install all cables that are necessary for computing needs.
4). Use zip ties through integral loops in rear of dock to
strain relieve connectors.
5). Gather all cables to one side and tie off to zip tie mount
with zip tie provided.
6). Create a service loop with cables to ensure that no
tension is on the connectors and to enable intended motion.
7). Tie off cables onto a stationary part of the
mounting system.
Use as many ties as necessary
to protect each connection
Close up of Zip Tie Mount
5
www.havis.com • 1-800-524-9900
This loop must be large
enough to allow full
range of rotation and
extension without
yanking connections
Tie off on stationary part
of the mounting system
Secure to zip tie mount
Advertisement
Table of Contents
