Precautions - Optex SL-100 TNR Installation Instructions Manual

1-2

PRECAUTIONS

Do not install the unit on
an unstable surface.
Do not allow the infrared
beam from an other pair of
the detector to reach the
receiver.
Receiver Transmitter
Receiver Transmitter
(another (another
detector) detector)
1-3 PARTS IDENTIFICATION
Main unit cover
Main unit cover
lock screw
Battery cover
lock screw
Battery cover
Do not install the pole in a
location where sufficient
stability can not be
ensured.
Install the unit at a height
where an object can be
detected without fail.
This symbol indicates prohibition.
Main unit
Optical lens
Optical
alignment dial
Dip SW
(Receiver only)
EN-3
Do not install the unit in
trees, leaves, or other
objects that may swing in
the wind and block the
beam.
The pole size should be
43 to 48 mm dia.
(1.69 to 1.89 inch dia.).
This symbol indicates recommendation.
Back box
Viewfinder
Battery
Plate
Do not install the receiver
in a location where it is
exposed to direct sunlight.
Install the unit at least 1 m
(3.3 ft.) away from the wall
or fence that may be running
parallel to the beam.
1 m (3.3 ft.)
Main unit mounting
bracket
Wireless transmitter size
mm (inch)
Unit: