Optex SL-100 TNR Installation Instructions Manual page 6

Mount the back box to the wall.
2
Distance from
the side wall:
at least 1m
Using Velcro tape, fix the wireless transmitters in the back box.
3
For more information on wiring, see "3-5 WIRING".
Velcro tape
Mount the main unit.
4
1
1 Attach the main unit
mounting bracket to the
back box.
Side wall
4×20 self tapping
(with rubber washer)
2 Route the three connectors
of the back box through the
slits on the upper part of the
main unit.
Cut the supplied Velcro
tape to an appropriate
length and apply.
Note>>
• When using BCU-5 (option), refer to
BCU-5 manual.
2
EN-6
Pitch: 83.5 mm
For connection
to gang electric
box
3
4
3 Tighten the main unit
fixing screw and turn the
optical unit 90 degrees.