Cautions - TRENDnet TV-IP440PI User Manual

TRENDnet User's Guide
Cautions:

Make sure the power supply voltage is correct before using the camera.

Do not drop the camera or subject to physical shock.

Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for an
extended period of time, put on the lens cap to protect the sensor from dirt.

Do not aim the camera lens at the strong light such as the Sun or an incandescent
lamp. Strong light can damage the camera sensor.

The sensor may be burned out by a laser beam. When any laser equipment is
being used, make sure that the surface of the sensor will not be exposed to the
laser beam.

Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between ‐30°C to 65°C), dusty or damp environment, and
do not expose it to high electromagnetic radiation.

To avoid heat accumulation, good ventilation is required for a proper operating
environment.

While shipping, the camera should be packed in its original packing.

Use water proof tape to cover all the wires, cables which will be exposed outdoor
after the camera installation.
© Copyright 2017 TRENDnet. All Rights Reserved.
Plan for Installation
Viewing angle

The camera has a wide viewing range that provides non‐distorted and detailed
images. Choose the location where has good angle to shoot the image you
expect to see. The motion detection area should also be considered when
installing the camera.
Weather Conditions

The camera is an outdoor dome camera, which fits most installations indoor and
outdoor. The camera can work under a wide range of weather conditions. For
severe weather conditions. Using the camera in milder weather conditions will
help extend the camera's life and preserve the quality of the camera image.

Moisture: Avoid damp or moist environments whenever you can. The camera is
an IP66 grade water proof camera, and it will work in moist environments.
However, rain may affect the picture quality, especially at night, water may
reflect the light from the infra‐red illumination and degrade picture quality.

Temperature: Camera works within a specified temperature range. Areas with
severe temperatures should be avoided when installing the camera. It's
recommended that you use an enclosure with a heater and blower if you plan
on using this camera outside of the specified temperature range.

Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image
sensor. If sunlight is necessary for your viewing purposes, provide protection for
the image sensor.

Lighting: Consider installing your camera faces the same direction of the light
sources. Shooting images with top‐down position outdoor or next to the existing
light source are good choices. Avoid the light source if it creates a shade that
darkens the viewing area.
TV‐IP440PI
5