User Accounts - TRENDnet TV-IP440PI User Manual

TRENDnet User's Guide
OSD, On Screen Display. The default is the camera's
model name:
Location: Label where you installed this camera
Authentication
RTSP: Camera's video stream can be accessed with RTSP, Real
Time Streaming Protocol. Only the administrator and
users can view this video stream. Un‐checking this box
will allow everyone access to this video stream without
authentication. Default: checked.
HTTP: Camera can be accessed via password protected web
management interface. Un‐checking this box will allow
anyone to access this camera and change its settings.
Default: checked.
Service
Enable Telnet Camera embedded Telnet service for multiple camera
control for system developer. Default: disable.
© Copyright 2017 TRENDnet. All Rights Reserved.
User Accounts
You can setup up to 32 user accounts to access the camera's video stream with a web
browser or real time video stream (RTSP). Only one administrator account can be setup
to configure the camera and cannot be deleted.
User Accounts
Add: Click Add button to add one user account. Select
user level as Operator account or user account.
Operator could configure settings. User account
could view but could not change any setting.
Modify: To change a user's name and password, highlight
the user by clicking on it. Then, click Modify
button. Administrator can change user's name,
level and password. The administrator's name is
fixed, you cannot change it. Click OK to save the
changes.
TV‐IP440PI
23