Product Hardware Features; Warnings; Cautions - TRENDnet TV-IP312PI User Manual

TRENDnet User's Guide

Product Hardware Features

Camera Overview
Ethernet/PoE
Optional
Mounting
Power
Hardware
Port
Connector

Optional Power Connector: This model is designed to power by PoE. For non-
PoE user, please connects the power adapter (12VDC1A sold separately) to
camera.

Ethernet/PoE Port: Plug the network cable to connect to supply power to the
camera if using non-PoE connection.

Mounting Hardware: Adjust the screws to fit the mounting position

IP66 Housing: Housing is rated with IP66.

IR Sensor: Detect the light source.

IR LEDs: The IR LEDs will be on when the sensor detect low light source.

Adjustable Sun Visor: Adjustable sun visor to prevent direct sun to the camera.
© Copyright 2015 TRENDnet. All Rights Reserved.
IR IR
IP66
Sensor LEDs
Housing

Warnings:


It is recommended to use the PoE injector or an IEEE 802.3at compliant PoE
switch.

If the product does not work properly, please contact your dealer or the nearest
service center. Never attempt to disassemble the camera yourself.
Disassembling the product will void the warranty and may cause harm or injury.

The installation should be done by a qualified service person and should
conform to all construction and electric regulations and other local codes.

Cautions:


Make sure the power supply voltage is correct before using the camera.

Do not drop the camera or subject to physical shock.

Do not touch sensor modules with fingers. If cleaning is necessary, use a clean
cloth with a bit of ethanol and wipe it gently. If the camera will not be used for
Adjustable
Sun Visor
an extended period of time, put on the lens cap to protect the sensor from dirt.

Do not aim the camera lens at the strong light such as the Sun or an
incandescent lamp. Strong light can damage the camera sensor.

The sensor may be burned out by a laser beam. When any laser equipment is
being used, make sure that the surface of the sensor will not be exposed to the
laser beam.

Do not place the camera in extremely hot, cold temperatures (the operating
temperature should be between -30°C to 65°C), dusty or damp environment,
and do not expose it to high electromagnetic radiation.

To avoid heat accumulation, good ventilation is required for a proper operating
environment.

While shipping, the camera should be packed in its original packing.

Use waterproof cap to prevent water soaking into the cable.
TV-IP312PI
3