TRENDnet User's Guide
SMTP Server: Simple Mail Transportation Protocol Server
address, the outgoing email server address. Please
ask your email service provider for details.
SMTP Port: Service port number for outgoing email.*
Check this box if your service provider requires a
Enable SSL:
SSL secured connection.
Attach Image/Interval: Check Attach Image if you want to send a
snapshot image with the email notification and
select the interval of snapshots in seconds.
Authentication: Check this box if your server requires a password
in order to send email. Most email servers require
authentication when sending an email.
User name: Enter the user name of outgoing email account
Password: Enter the password
Confirm: Enter the password again to confirm that the
password was entered correctly.
Click Save to save the changes
Receiver
Receiver 1: The first receiver's name.
Receiver 1's Address: The first receiver's email address.
Receiver 2: The second receiver's name.
Receiver 2's Address: The second receiver's email address.
Receiver 3: The third receiver's name.
Click Test to test the email settings. A text email will send to Receiver's email
address.
Click Save to save the changes
* Many ISPs do not allow service port 25 going through their network. Other popular
ports are 587 and 465. Please consult your email service provider and ISP for details.
© Copyright 2017 TRENDnet. All Rights Reserved.
Storage
Storage Management
* Micro SD card or Network storage device must be setup / formatted before it can be
managed / stored. Camera will save to SD card only when there is no additional NAS
device setup.
*Micro SD slot is located on the back of the camera. Using a screw driver to loosen the
screws and remove the cover. Please make sure the environment is dry and clean when
opening the dome cover.
TV‐IP440PI
46