TRENDnet User's Guide
42
Call pattern 2
43
Call pattern 3
44
Call pattern 4
45
One‐touch patrol
92
Start to set limit stops
Note: When you call preset 45 (one‐touch patrol), the speed dome patrols from
presets 1 to 32. Before you enable this function, please set presets 1 to 32 first.
© Copyright 2017 TRENDnet. All Rights Reserved.
103
Call patrol 6
104
Call patrol 7
105
Call patrol 8
Patrols
A patrol is a memorized series of preset functions. It can be configured and called on the
patrol settings interface. There are up to 8 patrol available for customization. A patrol
can be configured with 32 presets.
Configure a Patrol route
1. In the PTZ control panel, click
2. Select a patrol number from
Click
to add a preset to a patrol path.
3. Configure the preset number, patrol time and patrol speed.
Name
Description
Patrol
This is the duration the camera stays on one patrol point. The speed
Time
dome moves to another patrol point after the patrol time.
Patrol
This is the speed that the camera moves in between patrol points.
Speed
TV‐IP440PI
to enter the patrol settings interface.
.
16