TRENDnet User's Guide
Video Recording
Video Recording
Pre‐record: Recording time before trigger event.
Post‐record: Recording time after trigger event.
Overwrite: Select Yes to allow older recordings to be
overwritten.
Enable Record Schedule: Check this box and then click Save to enable video
recording.
© Copyright 2017 TRENDnet. All Rights Reserved.
Edit:
Click Save to save the changes
Click Edit to edit the recording schedule.
1. Select day of the week you want to edit the
schedule.
2. Select All Day or Customized schedule of the
day.
3. Set the time period and the event you want
to trigger the video recording continuous
(always recording) or motion detection.
4. Click Copy to Week if you want the same
daily schedule every day. Or, you can select
other day of the week and click Copy to copy
the schedule of the day to other days.
5. Click another day of the week by clicking on
its tab to set the next schedule. Click OK
when you have finished your settings.
TV‐IP440PI
39