Table of Contents
Advertisement
TRENDnet User's Guide
Domain: Enter your registered domain name on selected
DDNS service.
User Name: Enter the account name.
Password: Enter the password.
Click Save to save the changes
PPPoE
Setup PPPoE (ADSL) connection to connect your camera with your ISP, Internet Service
Provider.
PPPoE (ADSL)
Enable PPPoE: Check this box to enable PPPoE connection.
Dynamic IP: The IP address provided by ISP
User Name: Enter the account name.
Password: Enter the password.
Confirm: Enter the password again.
Click Save to save the changes
© Copyright 2017 TRENDnet. All Rights Reserved.
SNMP
SNMP Settings allows you to assign the contact details, location, community name and
trap settings for SNMP. This is a networking management protocol used to monitor
network‐attached devices. SNMP allows messages (called protocol data units) to be sent
to various parts of a network. Upon receiving these messages, SNMP compatible devices
(called agents) return data stored in their Management Information Bases.
TV‐IP440PI
29
Advertisement
Table of Contents
