Table of Contents
Advertisement
TRENDnet User's Guide
Presets
Use the presets panel to move to previously saved
locations
Presets
Configure a Preset position
A preset is a predefined image position. For the defined preset, you can click the Call
button to quickly view the desired image position.
1. In the PTZ control panel, select a preset number from the preset list.
2. Use the PTZ control buttons to move the lens to the desired position.
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
3. Click to finish the setting of the current preset.
4. You can click
to delete the preset. You can configure up to 256 presets.
© Copyright 2017 TRENDnet. All Rights Reserved.
Speed of pan/tile movement
Calling a Preset position
In the PTZ control panel, select a defined preset from the list and click to call the
preset.
The following presets are predefined with special commands. You can only call them
but not configure them. For instance, preset 99 is "Start auto scan". If you call preset
99, the speed dome starts auto scan function.
Special
Function
Preset
33
Auto flip
34
Back to initial position
35
Call patrol 1
36
Call patrol 2
37
Call patrol 3
38
Call patrol 4
39
IR cut filter in
40
IR cut filter out
41
Call pattern 1
TV‐IP440PI
Special
Function
Preset
93
Set limit stops manually
94
Remote reboot
96
Stop a scan
97
Start random scan
98
Start frame scan
99
Start auto scan
100
Start tilt scan
101
Start panorama scan
102
Call patrol 5
15
Advertisement
Table of Contents
