Table of Contents
Advertisement
TRENDnet User's Guide
4. Click
to save a preset into the patrol.
5. Repeat the steps from 3 to 5 to add more presets.
6. Click
to save all the patrol settings.
Calling a Patrol route
In the PTZ control panel, select a defined patrol from
to call the patrol.
Buttons on the Patrol interface:
Buttons
Description
Save a patrol
Call a patrol
Stop a patrol
Add a preset to a patrol path
Modify a preset
Delete a preset
© Copyright 2017 TRENDnet. All Rights Reserved.
Pattern
A pattern is a memorized series of pan, tilt, zoom, and preset functions. A pattern can
be called in the pattern settings interface. There are up to 4 patterns available for
customization.
and click
Configure a Pattern
1. In the PTZ control panel, click
2. Select a pattern number from the list as shown in Error! Reference source not
found..
3. Click
to enable recording the panning, tilting and zooming actions.
4. Use the PTZ control buttons to move the lens to the desired position after the
information of PROGRAM PATTERN REMAINNING MENORY (%).
• Pan the speed dome to the right or left.
• Tilt the speed dome up or down.
• Zoom in or out.
• Refocus the lens.
Delete all the presets in the selected patrol path
to enter the pattern settings interface.
TV‐IP440PI
17
Advertisement
Table of Contents
