Download
Share
Print this page
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Security Camera
  5. TV-IP400
  6. Frequently asked questions manual

TRENDnet TV-IP400 Frequently Asked Questions Manual

Trendnet tv-ip400: frequently asked questions
Hide thumbs Also See for TV-IP400:

Advertisement

Quick Links

Download this manual See also: User Manual
TV-IP400/TV-IP400W F.A.Q.
Q: How can I configure my TV-IP400 (w) through the web-based configuration?
A:
Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The
default IP address is 192.168.0.20.
Q: What is the default IP address of my TV-IP400 (w)?
A:
The default IP address is 192.168.0.20
Q: How can I view the TV-IP400 (w) remotely if it's behind a router or firewall?
A:
Each camera behind a firewall or router will need to forward the port that the camera is using. The
default port is 80.
If you are installing multiple cameras you must change the port on the additional cameras.
Step 1.
Open your web browser and type the IP address of the TV-IP400 (w) in the address bar.
The default IP address is 192.168.0.20.
Step 2.
Click Configuration at the top of the page then click Network on the left hand side.
Step 3.
Enable the Second HTTP Port and enter in the desired port for the camera in the Port
Number field.

Advertisement

loading

Related Manuals for TRENDnet TV-IP400

Summary of Contents for TRENDnet TV-IP400

  • Page 1 TV-IP400/TV-IP400W F.A.Q. Q: How can I configure my TV-IP400 (w) through the web-based configuration? Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The default IP address is 192.168.0.20. Q: What is the default IP address of my TV-IP400 (w)? The default IP address is 192.168.0.20...
  • Page 2 TV-IP400/TV-IP400W F.A.Q. Note: If you are still unable to access the camera remotely please check the following. Please make sure the proper gateway address is entered. This will be your router's LAN IP Address. Please make sure the proper DNS servers are entered. You can find this information on your router's status page.
  • Page 3 TV-IP400/TV-IP400W F.A.Q. Q: How do I configure the camera to record motion? Motion Configuration-1 Step 1. Start the IPView Pro Program by going to Start>Programs>IPView Pro>IPView Pro. Step 2. Click on “System Configuration”. Step 3. Motion Configuration-1 This setting provides the commands for motion detection control. Before configuring, you should select one camera from the pull-down menu.
  • Page 4 TV-IP400/TV-IP400W F.A.Q. Step 5. Click "Save". Motion Configuration-2 The Motion Configuration-2 setting allows you to configure the alarm and e-mail settings. - Invoke Alarm: Select this option to enable an alarm when motion is detected by the system. Note: Invoke Alarm requires that you have a trigger installed on the camera.
  • Page 5 TV-IP400/TV-IP400W F.A.Q. Q: How do I upgrade the firmware of my camera? Step 1. Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The default IP address is 192.168.0.20. Step 2. Click on “Configuration” on the top bar, then click the Firmware Upgrade on the left hand side of the screen.
  • Page 6 TV-IP400/TV-IP400W F.A.Q. Q: How can I email snapshots based on motion from my camera? Step 1. Start the IPView Pro Program by going to Start>Programs>IPView Pro>IPView Pro. Step 2. Click on the “System Configuration” button. Step 3. Click on “Mailing Configuration” and input your mail settings.
  • Page 7 Q: How do I configure my TV-IP400 (w) series cameras to upload snapshots to an FTP server? Step 1. Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The default IP address is 192.168.0.20. Step 2.
  • Page 8 TV-IP400/TV-IP400W F.A.Q. Note: For manual uploading view the image of the camera and click ON next to Upload Video. Q: How do I view the TV-IP400 (w) image using IPView Pro? Step 1. Start the IPView Pro Program by going to Start>Programs>IPView Pro>IPView Pro Step 2.
  • Page 9 Internet Explorer (5.0 or above) or Netscape Navigator (6.0 or above) Q: How do I add user accounts to my TV-IP400 (w)? Step 1. Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The default IP address is 192.168.0.20. Step 2.
  • Page 10 TV-IP400/TV-IP400W F.A.Q. Note: You can enable pan and tilt controls as well for individual users. Q: How do I reset my TV-IP400 (w) back to factory defaults? Step 1. Locate the reset button on the back of the unit. Step 2.
  • Page 11 Internet Camera is receiving/sending data from/to the network. Q: How do I set a password on my TV-IP400 (w)? Step 1. Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The default IP address is 192.168.0.20. Step 2.
  • Page 12 Click Save. Q: How do I connect my TV-IP400 (w) to my wireless network? Step 1. Open your web browser and type the IP address of the TV-IP400 (w) in the address bar. The default IP address is 192.168.0.20. Step 2.
  • Page 13 Enter in your wireless settings to match your existing wireless access point then click Save. Q: How do I control the pan and tilt of the TV-IP400 (w)? From the web-based interface when viewing the image through Java or Active X, the controls are...
  • Page 14 You can also control the pan and tilt through the IP View Pro application. Q: I have setup 5 preset positions, when I click on “swing”, it just swings from position 1 to position 5 and then stops. Isn’t the TV-IP400 (W) supposed to continue to swing? No.

This manual is also suitable for:

Tv-ip400w