Table of Contents
Advertisement
TRENDnet User's Guide
Advanced Settings
System
Device Settings
Setup your camera name and location for easy identification. This camera name will also
be recognized by other network camera software as the name of this camera.
OSD, On Screen Display, the camera name is setting up here as well.
Names
Name of the camera. The camera name setup here can
Camera Name:
be discovered by other network camera software and
OSD, On Screen Display. The default is the camera's
model name:
© Copyright 2015 TRENDnet. All Rights Reserved.
Label where you installed this camera
Location:
Authentication
Camera's video stream can be accessed with RTSP, Real
RTSP:
Time Streaming Protocol. Only the administrator and
users can view this video stream. Un-checking this box
will allow everyone access to this video stream without
authentication. Default: checked.
Camera can be accessed via password protected web
HTTP:
management interface. Un-checking this box will allow
anyone to access this camera and change its settings.
Default: checked.
Service
Camera embedded Telnet service for multiple camera
Enable Telnet
control for system developer. Default: disable.
User Accounts
You can setup up to 16 user accounts to access the camera's video stream with a web
browser or real time video stream (RTSP). Only one administrator account can be setup to
configure the camera and cannot be deleted.
TV-IP312PI
16
Advertisement
Table of Contents
