User Accounts - TRENDnet TV-IP322WI User Manual

TRENDnet User's Guide
Label where you installed this camera
Location:
Authentication
Camera's video stream can be accessed with RTSP, Real
RTSP:
Time Streaming Protocol. Only the administrator and
users can view this video stream. Un-checking this box
will allow everyone access to this video stream without
authentication. Default: checked.
Camera can be accessed via password protected web
HTTP:
management interface. Un-checking this box will allow
anyone to access this camera and change its settings.
Default: checked.
Service
Camera embedded Telnet service for multiple camera
Enable Telnet
control for system developer. Default: disable.

User Accounts

You can setup up to 16 user accounts to access the camera's video stream with a web
browser or real time video stream (RTSP). Only one administrator account can be setup
to configure the camera and cannot be deleted.
© Copyright 2015 TRENDnet. All Rights Reserved.
User Accounts
Click Add button to add one user account. User
Add:
account could view but could not change any setting.
Modify: To change a user's name and password, highlight the
user by clicking on it. Then, click Modify button. You
can change the user's name and password. You can
also change the administrator's password. The
administrator's name is fixed, you cannot change it.
Click OK to save the changes.
TV-IP322WI
28