Pin Setup( Useless If Pin Is Not Assigned ); Address List; Reset ( May Be Blocked For Dealer-Programmed Units ) - Alinco DR-138 Instruction Manual

8
General Setting
This function may not be available in dealer-programmed units.
PIN Setup(
Useless if PIN is not assigned
Enable this function, you have to insert a matching PIN to enter into
normal status when radio is turned on.(The PIN can be assigend by
programming software only.)
1.
Press and hold
seconds to enter setting menu.
2.
Press / key to choose No.27
menu, LCD displays "CODE-OF".
3.
Turn Main Dial to enable/disable Pin
setup.
ON: Turn on Pin setup
23
OFF:Turn off Pin setup
4.
Press key to confirm and exit.

Address list

You store desired ID and corresponding ID name in address list. The
LCD displays ID corresponding name if radio received ANI calling and
find matching ID in address list.
1.
Press and hold key for over 2 seconds to enter general setting
menu.
2.
Press / key to choose No.28
menu, LCD displays "BOOK".
3.
Press to enter into ID setting, press
/ to select the desired group (00-
127, total is 128 group ID). Turn Main
Dial to select desired number, press
)
key for over 2
confirm and move cursor
to next edition, press
digits.
4. After finishing edition, press to confirm
and enter into edition of current group's ID corresponding name.
Turn selector knob to select desired letter, press
cursor to next edition, press
total 128 group ID and corresponding ID name.
5.
Press to confirm and return into main menu. Repeat above
Step 3 and Step 4 operations to edit multi-ID and corresponding ID
name.
6.
Press key to return to standby status.
RESET (
May be blocked for dealer-programmed units
If your radio seems to be malfunctioning, resetting the microprocessor
may solve the problem. When performing the reset, you may lose
memory data and stored information. Back up or write down important
data before performing the reset.
1.
Press and hold key for over 2
seconds to enter general setting menu.
2.
Press / key to choose No.29
menu, LCD displays "RESTORE".
3. Turn Main Dial to select the desired
operation.
FA C T: R e s u m e f a c t o r y d e f a u l t f o r
channel, signaling and general setting.
SETUP:Return initial setup for No.18-No.27 general setting menu.
4.
Press key to perform the reset.
to clear out all
to clear out all letters. 00-127,
)
to move