Tx Power Selection; Dtmf Code Enquiry And Setup; Manually Transmitting Dtmf Tones - Alinco DJ-A40 Instruction Manual

ADVANCED OPERATIONS

TX Power Selection

After pressing 【 A 】 key, while
output power. When the bottom left corner of screen displays 'H' the power is 5W/high power.'L' for 0.5W.
When nothing is displayed, the output power is middle/2W.

DTMF Code Enquiry and Setup

After pressing 【 A 】 key, while
【 0 】 key to show the DTMF Auto-dialer group setting (16 groups in total).
You should preprogram the DTMF auto-dialer group in advance to activate this
feature.Each group can store up to 16 DTMF characters.
1.Press 【 B 】 key or 【 C 】 key to choose the desired Auto-dialer group. If it is not
been edited in advance, it displays the current group number and "__".
2.When current group is displayed as "__", press 【 A 】 key, while
displayed on the top left corner, press and holding 【 0 】 key for 2 seconds. A
beep sounds "DU" and enters to DTMF code edit mode. Now you can enter the
DTMF data using keypad.Press and hold 【 0 】 key to erase and edit the codes.
3.After editing, press 【 PF2 】 key to sound DTMF tones then to save and exit the edit mode.

Manually Transmitting DTMF Tones

Method 1: Press and hold 【 PTT 】 key to transmit. While transmitting enter the
desired DTMF characters using corresponding keys.
icon is displayed on the top left corner, press 【 9 】 key to set the
icon is displayed on the top left corner, press
icon is
Professional
FM Transceiver
31