Testing And Getting To Know Your Monitor - Angelcare AC115 Owner's Manual

Baby movement monitor, with sound
Hide thumbs Also See for AC115:
Table of Contents

Advertisement

STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare
monitor can be used with the pre-programmed factory settings or you can customize your
®
settings to your preference.
All changes and adjustments
made in the main menu will not
be saved unless you confirm
them by pressing the EXIT
button.
5.1 - MENU ACCESS AND CHANGING THE SETTINGS
The MENU settings are accessed by pressing and HOLDING the MENU button on the Parent Unit. The MENU
functions are in a loop. Each time you press the OK button briefly you move on to the next setting. Once you
have selected your preferred settings you must press EXIT MENU or your changes will not be saved. The MENU
functions are in the following order:
PRESS AND HOLD: Movement & ''TIC".......................................................................................................STEP 5.2
PRESS 1 TIME: Sound ......................................................................................................................... STEP 5.5
PRESS 2 TIMES: Sound Transmission (VOX) ......................................................................................... STEP 5.6
PRESS 4 TIMES: Temperature ................................................................................................................STEP 5.7
5.2 - ACTIVATING/DEACTIVATING THE SENSOR PAD
SET THE MOVEMENT DETECTION
Allows you to detect baby's movements.
2
SET THE TIC FUNCTION
Allows you to detect baby's movements as well as hear a TIC sound.
IMPORTANT
To activate the ''TIC'' Function, the movement detection activated.
IMPORTANT
When in MENU mode, sound transmission
between the Parent and Nursery Units will be
temporarily deactivated. The TIC indicator will
flash rapidly if no movement is detected.
1) Press and HOLD the MENU button until the
Movement monitoring
2) Use the UP and DOWN arrows to activate or
deactivate movement detection.
3) Press the OK button to go to the next setting
or press the EXIT button to confirm your
choice.
E
N
icon blinks.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents