Testing And Getting To Know Your Monitor - Angelcare AC110 Owner's Manual

When Parent Unit is ON and Nursery Unit is OFF or, if there is a lost connection
between the 2 units;
- The Out-of-Range icon on the Parent Unit will blink
- The Parent Unit will beep 3 times every 15 seconds
IMPORTANT ICONS
Temperature alerts icons:
Sound icon: Indicates if the sound
is activated
VOX icon: Indicates when the
Nursery Unit is in VOX mode
Sound activated transmission
(VOX ON)
Continuous sound transmission
(VOX OFF)
STEP 4 - TESTING AND GETTING TO KNOW YOUR MONITOR
The Angelcare monitor can be used with the pre-program factory settings or you can customize your settings to
®
your preference.
All changes and adjustments
made in the main menu will
not be saved unless you
confirm them by pressing the
EXIT button.
4.1 - MENU ACCESS AND CHANGING THE SETTINGS
The MENU settings are accessed by pressing and HOLD the MENU button on the Parent Unit. The MENU functions
are in a loop. Each time you press the OK button briefly you move on to the next setting. Once you have selected
your preferred settings you must press EXIT MENU or your changes will not be saved. The MENU functions are in
the following order
PRESS 1 TIME: VOX ............................................................. STEP 4.3
PRESS 2 TIMES: TEMPERATURE (Unit) .................................................. STEP 4.4
PRESS 3 TIMES: TEMPERATURE (Alarm) ................................................. STEP 4.4
Temperature display
Too Warm
Too Cold
Sound Sensitivity Indicator
Connection icon: Indicates the
connection quality between the Parent
Unit and the Nursery Unit
Battery level icon: Indicates
Parent Unit battery life
IMPORTANT
When in MENU mode, sound transmission
between Parent and Nursery Units will be
temporarily deactivated.
Good connection
Medium connection
Poor connection
Out-of-range
Full
1/2
Empty
Charging
E
N
7