Cornelius SPIRE 4.1 Operator's Manual page 19

8. Clean the exposed cold plate surface by
extending the brush through the opening in
the bottom of the hopper.
IMPORTANT: Make sure you do not
scratch or damage the
cold plate.
9. Using a mechanical spray bottle filled with sanitizing solution, spray the entire interior and agitator assembly
and allow it to air dry.
10. Open the display door and remove the ice chute cover from the unit.
11. With a nylon bristle brush or sponge, clean the inside of the ice chute, gasket and cover with soap solution
and rinse them thoroughly to remove all traces of detergent.
12. Reassemble the ice chute assembly.
13. Using a mechanical spray bottle filled with sanitizing solution, spray the inside of the ice chute. Allow the ice
chute to air dry
© 2017, Cornelius Inc.
Cold
plate
opening
Figure 29
- 19 -
Spire 4.1 Operator's Manual
Publication Number: 620066826OPR