Align Machine To Stand - Gfp 865DH-4 Operating Manual

8 G. Align the Machine to the Stand
1. Attach alignment brackets to outside of both stand legs
2. Insert one alignment anchor bolt through the bracket on the outside of the stand into bottom of
the machine on each side.
3. Secure the alignment bolt to the inside of the cabinet with the provided flat washer, lock washer
and hex nut.
NOTE: Failure to properly install the alignment brackets will result in the web skewing
which will end in costly ruined output.
4. Insert four (4) anchor bolts through the stand into the bottom of machine.
Anchor
Bolt
Gfp 865DH-4
13
March 2021
Alignment bracket
Alignment bracket screws
Anchor Bolt