Temporarily Silencing The Ringer - Snom C520-WiMi User Manual

Conference phone operation

Temporarily silencing the ringer

When the conference phone is ringing, you can temporarily silence its ringer without
disconnecting the call. The next call will ring normally at the preset volume. Press
on the base unit. The
Note: You can also press
adjustment will be saved and applied to the next incoming call.
Locating wireless microphones
This feature helps you find any misplaced wireless mics within the range of the
base unit.
1. Press , press
select by pressing
2. With the Status menu on the display, press
menu directly, or scroll down and highlight Wireless microphone, then press
3. With the Wireless microphone menu on the display, press
The display of the phone shows the message
Wireless microphones will ring.
Press CANCEL/Back to stop.
All wireless microphones that are not on the charging cradles play the location
tone for 30 seconds.
Muting the location tone
• On the phone, press
• On the wireless microphone(s), press
• Putting the microphone(s) back onto the charging cradle will also mute the location
tone.
symbol appears in the upper right corner of the display
or on the phone to adjust the ringer volume. The
2
to open the Status menu directly, or highlight STATUS and
ABC
.
Back or .
4
to open the Wireless microphone
GHI
.
23
.
Locate .
.