Status Indicators Overview - Snom C520-WiMi User Manual

Getting Started

Status indicators overview

Status LED on the conference phone
Yellow (single short
flash)
Green (fast flash)
Green (steady)
Green (slow flash)
Red (steady)
Yellow (flashing)
Bluetooth Status LEDs, blue
CELL 1 LED (BLUE)
Steady Bluetooth device 1 is connected
Fast flash Incoming call on device 1
Slow flash Device 1 is on hold
LEDs flash Phone is in discovery mode
alternatingly
Status LED on the wireless microphone
Yellow (blinking 3x)
Red
Yellow (flashing)
Red/green alternating
Green (flashing)
Green (steady)
Green (fast flash)
Red
Off
When phone is starting to power up and when it has
powered up and is ready to use.
Incoming call
In a call
Call on hold
All microphones in the system (phone, wireless
microphones, C 52 speakerphones) are muted during a call
No line registered or Network down.
When phone is starting to power up
Charging on the cradle, phone in idle mode
Battery is low
Wireless microphone is registering to the phone
Incoming call
In a call (active or on hold)
Incoming call
All microphones in the system (phone, wireless
microphones, C 52 speakerphones) are muted during a call
Microphone is off the cradle or out of range or unregistered
10
CELL 2/HEADSET LED (BLUE)
A second Bluetooth device /
Bluetooth headset is connected
Incoming call on device 2
Device 2 is on hold
Phone is in discovery mode